How to Fix a Separated Zipper: 11 Steps (with Pictures) - wikiHow (2024)

  • Categories
  • Home and Garden
  • Tools
  • Fastening Tools
  • Zip Fasteners

Download Article

Explore this Article

methods

1Reducing the Opening On the Zipper Slider

2Removing and Reinserting the Slider

Other Sections

Video

Tips and Warnings

Related Articles

References

Article Summary

Co-authored byChloée Ohayon-Crosby

Last Updated: May 15, 2024Fact Checked

Download Article

It's frustrating when zippers break suddenly, such as when their teeth separate and the zipper slider won't open and close them anymore. This can be embarrassing if it's on your pants zipper or if it's on a backpack and all of your things fall out. However, there are several ways of fixing a separated zipper. You can either try to fix the slider itself or realign the zipper by taking it apart and putting it back together. One of these methods is likely to fix the majority of zippers that have separated.

Method 1

Method 1 of 2:

Reducing the Opening On the Zipper Slider

Download Article

  1. 1

    Inspect the slider on the zipper. Many times when the sides of a zipper separate and won't go back together as you pull the slider, it's because the slider itself is damaged. When you use a zipper often, the slider opening will begin to stretch open a bit. Inspect both ends of the zipper to determine if they have the same opening size. If one end looks wider than the other, then this may be why your zipper failed.[1]

    • As the opening increases in size, it puts less pressure on the tracts of the zipper, allowing them to stay separated.

    Tip: This is a common problem on bags and purses, as their zippers get a lot of wear and tear.

  2. 2

    Inspect the rest of the zipper and fix any problems that are apparent. For instance, straighten out any bent zipper teeth that you see. If there are tears in the fabric of the zipper, mend them.[2]

    • In some cases, bent teeth on a zipper will cause a zipper to separate. If the zipper teeth are metal, you can use a pair of pliers to straighten them out. If the teeth are plastic, gently try to straighten them with your fingers, as pliers could easily break them off.

    Advertisement

  3. 3

    Squeeze the opening on the slider to reduce its size. Squeeze the slider on the top and bottom with your fingers or a pair of pliers. This will make the opening inside the slider the correct size once again.[3]

    • On one end of the slider there is a middle piece that won't let you squeeze it. On the other end there is no middle piece. That is the side that gets opened and needs to be squeezed back together.
    • Don't squeeze the slider too strongly though, as you don't want to make the gap smaller than it should be. You will know the gap is too small if it becomes difficult to pull up and down the zipper slider along the tracks.
  4. 4

    Check the zipper. Once you've reshaped the slider, move it up and down the zipper. If it is properly fixed, the slider should go back to opening and closing the zipper right away.[4]

    • If the zipper still doesn't work, either squeeze the slider more or try another solution.[5]
  5. Advertisement

Method 2

Method 2 of 2:

Removing and Reinserting the Slider

Download Article

  1. 1

    Assess whether the slider needs to be realigned. If you have tried to move the zipper up and down, force the zipper sides together, and reduce the opening on the slider, the next thing to try is starting from scratch. If you can see the stops at the top of the zipper and they are metal, taking off the slider and realigning the zipper is possible.[6]

    • The stops at the top of the zipper are small pieces of metal that are shaped a bit differently from the teeth on the zipper. They are not big pieces and they look similar to teeth but they are slightly larger and are positioned at the very end of each side of teeth.
    • If the stops are plastic, you won't be able to take them off and put them back off without breaking them, so you can't use this method.
  2. 2

    Remove the top stops. Get a pair of small-tipped pliers and gently open up the stop. The stop it shaped like a "u," so you simply need to open up the side of the stop that is hooked onto the tape of the zipper. Once it is just slightly opened, you can wiggle it and unhook it from the tape.[7]

    • It's important to be gentle with the stop and don't cut it or bend it until it breaks. You need to keep it intact.
    • Keep the top stops and put them somewhere safe, as you'll need to use them again.

    Tip: A pair of small wire cutter with a pointed end work well for removing the top stops.

  3. 3

    Pull the slider up and off the zipper. Once the tops stops are removed, you will be able to easily pull the slider off the end of the zipper. Taking it off will allow you fix the tracks and then get the slider back in line.[8]

  4. 4

    Push the teeth of the zipper together. Start at the bottom of the zipper, the opposite end from where you took off the slider. Push the teeth of the zipper together, making sure that the teeth from the left and right sides alternate.[9]

    • Put the zipper on top of a hard surface. As you work your way up the zipper, press down on the teeth to pop them into place.
    • It is important that the teeth are perfectly lined up. Make sure that once you get to the top of the zipper that you don't have extra teeth on one side. This would mean that the teeth are not lined up.
  5. 5

    Reinsert the slider onto the top of the zipper. Once you have realigned the teeth, stick the bottom of the slider back onto the top of the tracks. Insert one track into the bottom of the slider, which is the end without a piece of metal separating the two sides. Then insert the other track.[10]

    • You will know each side is inserted when several teeth have gone up into the slider and the track won't go any further.
    • It's easiest to insert one side and then the other. Putting them both in at once doesn't typically work.
  6. 6

    Run the slider up and down to check your work. Pull the slider down a few inches to make sure that it is on track. Move it up and down a bit to make sure it opens and closes the zipper correctly.[11]

    • Be sure not to pull the slider all the way back up to the top, as it will slide off of the tracks again without the top stops in place.
  7. 7

    Reapply the top stops. Once the zipper is working once again, put the top stops back in place. Position them in the spots where they were originally installed. Squeeze the ends of the stops with your pliers until they grip the zipper tape once again.[12]

    • Wiggle each stop after you reinstall it to ensure that it is securely in place.
  8. Advertisement

Expert Q&A

Search

Add New Question

  • Question

    Can I fix an invisible zipper this way?

    Chloée Ohayon-Crosby
    Costume Designer & Wardrobe Specialist

    Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.

    Chloée Ohayon-Crosby

    Costume Designer & Wardrobe Specialist

    Expert Answer

    Invisible zippers are made out of thin plastic and are usually harder to fix. While it's possible, I would recommend just replacing the zipper altogether.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 24Helpful 31

  • Question

    How do you manually close a zipper?

    Chloée Ohayon-Crosby
    Costume Designer & Wardrobe Specialist

    Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France.

    Chloée Ohayon-Crosby

    Costume Designer & Wardrobe Specialist

    Expert Answer

    Start at the bottom of the zipper. One-by-one press the teeth of the zipper together, alternating the right and left sides until the zipper is closed.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 38Helpful 20

  • Question

    Does this work on a bag?

    How to Fix a Separated Zipper: 11 Steps (with Pictures) - wikiHow (20)

    Community Answer

    It doesn't matter what the zipper is on, it should work. The only way it might be different is if it's a two-way zipper.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 34Helpful 40

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Video

      Tips

      • Invisible zippers and plastic zippers are harder to fix. If you have one of these, you may be better off replacing it.[13]

        Thanks

        Helpful1Not Helpful0

      • Just because you have a broken zipper, that doesn't mean that your piece of clothing or bag is broken forever. If you can't get the sides back together, you can always replace the zipper altogether.

        Thanks

        Helpful4Not Helpful3

      • Sellotape is your friend, if a zip is broken always try sellotape or duct tape before trying any other solutions.

        Thanks

        Helpful9Not Helpful20

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Name

      Please provide your name and last initial

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      You Might Also Like

      How toRepair a Zipper when the Slider Has Come Off CompletelyHow toStop a Zipper from Unzipping Itself
      How toFix a Jean ZipperHow toReplace a Zipper PullHow toFix a Zipper on a SuitcaseHow toFix a Broken ZipperHow toReplace a ZipperHow to Make a Zipper Slide More Easily with Household ItemsHow toFix a Tent ZipperHow toRemove Salt Build up on a ZipperHow toRepair an Invisible ZipperHow toAdd a Zipper to Boots

      Advertisement

      More References (4)

      1. https://www.popularmechanics.com/home/interior-projects/a30997350/how-to-fix-a-zipper/
      2. https://youtu.be/-QnVZ3NK7OA?t=532
      3. https://youtu.be/-QnVZ3NK7OA?t=500
      4. Chloée Ohayon-Crosby. Costume Designer & Wardrobe Specialist. Expert Interview. 24 July 2020.

      About This Article

      How to Fix a Separated Zipper: 11 Steps (with Pictures) - wikiHow (31)

      Co-authored by:

      Chloée Ohayon-Crosby

      Costume Designer & Wardrobe Specialist

      This article was co-authored by Chloée Ohayon-Crosby. Chloée Ohayon-Crosby is a Costume Designer and Wardrobe Specialist in Los Angeles, California. With over eight years of experience in fashion consulting, Chloée specializes in personal, film, theater, and commercial styling as well as image consulting and costume design. Chloée has worked as an assistant designer for the distinguished fashion house Chloée and as a freelance stylist with Glamour Italia. Chloée studied Fine/Studio Arts at the Ecole Nationale Supérieure des Beaux-Arts and Fashion Design and Merchandising at the world renowned ESMOD École Supérieure des Arts in Paris, France. This article has been viewed 1,154,918 times.

      170 votes - 69%

      Co-authors: 14

      Updated: May 15, 2024

      Views:1,154,918

      Categories: Featured Articles | Zip Fasteners

      Article SummaryX

      A separated zipper can be incredibly frustrating, but you can fix it by using a pair of pliers to squeeze the slider back to its original size. If you look at the slider and the opening is wider than the back, use your fingers or a pair of pliers to bend the metal back to the right size again. Make sure to avoid squeezing too much, or the slider will have problems going up and down the zipper. Once you’ve reshaped the slider opening, give the zipper a test to see if your problem has been fixed. If this doesn’t work, use a pair of pliers to remove the stops at the end of the zipper and take the slider completely off. Then, manually close the zipper with your fingers and place the slider back at the top. For more help, like how to fix bent teeth on a zipper, scroll down!

      Did this summary help you?

      In other languages

      Spanish

      German

      Hindi

      Dutch

      Portuguese

      Indonesian

      Turkish

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 1,154,918 times.

      Reader Success Stories

      • How to Fix a Separated Zipper: 11 Steps (with Pictures) - wikiHow (32)

        George Tsolas

        Dec 23, 2022

        "Had a hunting backpack the zipper was not lining up. I looked online and the first tutorial didn't have enough..." more

        Rated this article:

      More reader storiesHide reader stories

      Did this article help you?

      Advertisement

      How to Fix a Separated Zipper: 11 Steps (with Pictures) - wikiHow (2024)
      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Edwin Metz

      Last Updated:

      Views: 5861

      Rating: 4.8 / 5 (78 voted)

      Reviews: 93% of readers found this page helpful

      Author information

      Name: Edwin Metz

      Birthday: 1997-04-16

      Address: 51593 Leanne Light, Kuphalmouth, DE 50012-5183

      Phone: +639107620957

      Job: Corporate Banking Technician

      Hobby: Reading, scrapbook, role-playing games, Fishing, Fishing, Scuba diving, Beekeeping

      Introduction: My name is Edwin Metz, I am a fair, energetic, helpful, brave, outstanding, nice, helpful person who loves writing and wants to share my knowledge and understanding with you.